Wednesday, May 14, 2008 at 11:30 AM | 1 comments

To determine what NICs are configured on a system, the following command can be run:

# ifconfig -a
lo0: flags=1000849 mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843 mtu 1500 index 2
inet 148.173.216.29 netmask ffffff00 broadcast 148.173.216.255
ether 0:0:be:a9:56:5f
ce0:3: flags=1000843 mtu 1500 index 2
inet 148.173.216.227 netmask ffffff00 broadcast 148.173.216.255
ce2: flags=1000843 mtu 1500 index 3
inet 10.10.52.29 netmask fffffe00 broadcast 10.10.53.255
ether 0:0:be:a9:56:5f
ce4: flags=1000843 mtu 1500 index 5
inet 10.67.196.207 netmask fffffe00 broadcast 10.255.255.255
ether 0:0:be:a9:56:5f

In Solaris:

To determine the link speed and/or duplex mode used by the CE driver, the following commands can be run:

    # kstat -p ce | grep link_speed
# kstat -p ce | grep link_duplex
Posted by JAUGHN
Visit the Site
MARVEL and SPIDER-MAN: TM & 2007 Marvel Characters, Inc. Motion Picture © 2007 Columbia Pictures Industries, Inc. All Rights Reserved. 2007 Sony Pictures Digital Inc. All rights reserved. blogger template by blog forum